Nomad Pro 750 x 500 mm

A heavier-duty top for the Nomad

The Nomad Pro is the Nomad folding welding table with an upgraded top. The 750 x 500 mm plate is 8 mm Nitrided steel, with 150 16 mm holes on a 50 mm grid for 16 mm clamps and fixturing tools.

Two locking handles hold the top flat or at an angle, and the folding base rolls on two casters with an eccentric foot to level it.

Set it, tilt it, fold it away

• Set the height - Loosen both knobs and pull both pins, move the two posts evenly, then re-pin and tighten. Two people support the top.
• Unlock the top - Loosen the two yellow locking handles and the top rotates on its angle-adjustment plates.
• Tilt and lock - Stop at a preset notch or anywhere between them, then retighten both handles to hold the angle.
• Fold and roll - Lock the top vertical, close the legs and roll the folded table away on its two casters.

Construction

• Plate - An 8 mm Nitrided steel plate, 750 x 500 mm. 
• Hole pattern - 150, 16 mm holes, 15 across and 10 deep, on 50 mm centers: 700 x 450 mm hole field.
• Tilt - A notched angle-adjustment plate on each post, each clamped by its own yellow locking handle.
• Base - Two folding legs assemblies, one with a tool shelf, pinned height posts, two casters and an eccentric leveling foot.